139
Appendix
Gigaset SX763 WLAN dsl / en AnnA / A31008-M707-R131-1-7619 / appendix.fm / 20.07.2006
Sc
hablone 2
005_0
7_2
7
Open source licenses
Information in relation to free software can be found on the CD-ROM provided.
FCC / ACTA Information
Warning
: Changes or modifications to this unit not expressly approved by Siemens Cordless Products could void
the FCC authority to operate the equipment. This includes the addition of any external antenna device.
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom
of the base station is a label that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone network nust comply with
the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular
plug is provided with this product. It is designed to be connected to a compatible modular jack that is also com-
pliant. See installation instructions for details.
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs
on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas,
the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a
line, as determined by the total RENs, contact the local telephone company. For products approved after July 23,
2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits
represented by ## are the REN without a decimal point (
e.g.
, 03 is a REN of 0.3). For earlier products, the REN is
separately shown on the label.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance, that
temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone com-
pany will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with
the FCC if you belive it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could
affect the operation of the equipment. If this happens the telephone company will provide advance notice in order
for you to make necessary modifications to maintain uninterrupted service. If you experience trouble with this
telephone system, disconnect it from the network until the problem has been corrected or until you are sure that
the equipment is not malfunctioning.
If trouble is experienced with this equipment, for repair or warranty information, please contact Siemens
Customer Care, Tel. 1-888-777-0211. If the equipment is causing harm to the telephone network, the telephone
Software
Browser-based configuration environment
NAT, PPPoE, PPPoA
VPN pass-through, L2TP, IPSec
DHCP server and client, DynDNS
NAT, virtual server, DMZ
Security setup
Firewall, prevention of hacker attacks
MAC address filtering
Domain blocking
DoS blocking, SPI
Log file
WEP encryption
WPA encryption
WPA2 encryption
IEEE 802.1x
Integrated SIP client
