Siemens SX763 Manual Download Page 117

Page: 117 / 162

117

Status information

Gigaset SX763 WLAN dsl / en AnnA / A31008-M707-R131-1-7619 / admin_router.fm / 20.07.2006

hablone 2

005_0

7_2

ADSL Line
– Status

The status of the cable connection from your device to your DSL port.

–

Line mode

The current line mode used by your DSL port.

–

Maximum line rate

The maximum possible data transfer rate of your DSL port for incoming and out-

going data traffic.

–

Noise margin

The maximum signal-to-noise ratio of your DSL port for incoming and outgoing

data traffic.

–

Line attenuation

The line attenuation of your DSL port for incoming and outgoing data traffic.

–

Output power

The output power of your DSL port for incoming and outgoing data traffic.

Address Translation (NAT)

–

Status

Shows the status of the NAT (Network Address Translation) for the Internet con-

nection.

–

NAT table

Shows the current number of entries in the NAT table.
Click

Empty

to delete all the current entries in the NAT table.

Click

Refresh

to refresh this screen and update the displayed data.

Summary of Contents for SX763



































































































































































Search results

Summary of Contents for SX763

Reviews:

Siemens SX763, Manual, Page: 117 / 162

Search results

Summary of Contents for SX763

Reviews: