manualshive.com logo in svg

Siemens SITRANS FC310, Compact Operating Instructions, Page: 21 / 54

Share
Download
Siemens SITRANS FC310 Compact Operating Instructions Download Page 21

NOTICE
Aggressive atmospheres
Damage to device through penetration of aggressive vapors.
● Ensure that the device is suitable for the application.

NOTICE
Direct sunlight
Device damage. 
The device can overheat or materials become brittle due to UV exposure.
● Protect the device from direct sunlight.
● Make sure that the maximum permissible ambient temperature is not exceeded. Refer to 

the information in Technical data (Page 47).

NOTICE
Strong vibrations
Damage to device.
● In installations with strong vibrations, mount the transmitter in a low vibration environment.

3.1.2

Proper mounting

WARNING

Incorrect mounting at Zone 0
Risk of explosion in hazardous areas.
● Ensure sufficient tightness at the process connection.
● Observe the standard IEC/EN 60079-14.

WARNING

Loss of type of protection
Risk of explosion. Damage to device if the enclosure is open or not properly closed. The type 

of protection specified on the nameplate or in Technical data (Page 47) is no longer 

guaranteed.
● Make sure that the device is securely closed.

Installing/mounting

3.1 Basic safety notes

SITRANS FC310

Compact Operating Instructions, 01/2019, A5E44932112-AB

21

Summary of Contents for SITRANS FC310























































Reviews:

No comments