Siemens SITRANS F M MAG 5000 Manual Download Page 38

Page: 38 / 107

Connecting

WARNING

Mains supply from building installation Class II
A switch or circuit breaker (Max. 15 A) must be installed in close proximity to the equipment

and within easy reach of the operator. It must be marked as the disconnecting device for

the equipment.

WARNING

Protective conductor terminal
The required cable is min. AGW16 or 1.5 Cu.

WARNING

Wire insulation
The insulation between the connected mains supply and 24 V AC/DC supply for the

flowmeter must at least be rated with double or reinforced insulation at mains voltage.
For field wiring installation: Ensure that the National Installation Code of the country in

which the flowmeters are installed is met.

Note
National installation code
Observe country specific installation directives for field wiring.

www.eltra-trade.com [email protected]

+421 552 601 099

Summary of Contents for SITRANS F M MAG 5000












































































































Search results

Summary of Contents for SITRANS F M MAG 5000

Reviews:

Siemens SITRANS F M MAG 5000, Manual, Page: 38 / 107

Search results

Summary of Contents for SITRANS F M MAG 5000

Reviews: