manualshive.com logo in svg

Siemens SITRANS F M MAG 5000, Manual, Page: 31 / 107

Share
Download
Siemens SITRANS F M MAG 5000 Manual Download Page 31

Installing/Mounting 

 

4.5 MAG 5000/6000 CT 

 

28

 

8.

 

Tighten cable glands to obtain optimum sealing. 

 

 

 

CAUTION 

When remote mounted, power supply PE wire must be connected to PE terminal (

). 

Coil cable shield must be connected to SHIELD terminal. 

 

9.

 

Mount transmitter on terminal box. 

 

10.

 

Transmitter is ready to be powered up. 

 

 

 

NOTICE 

Exposing the transmitter to direct sunlight may increase the operating temperature 

above its specified limit, and decrease display visibility. 
A sun shield is available as accessory. 

 

 

4.5

 

MAG 5000/6000 CT 

To ensure that the settings of this custody transfer-approved MAG 5000/6000 CT transmitter 

are not changed, it is necessary to install a hardware key to lock the software functions and 

to seal the device. 
MAG 6000 CT is installed like a Standard MAG 6000 except for the final sealing. 
Calibration sealing has been carried out at calibration. 

www.eltra-trade.com                                    [email protected] 

+421 552 601 099

Summary of Contents for SITRANS F M MAG 5000












































































































Reviews:

No comments