Siemens SINUMERIK 840C Operator'S Manual Download Page 222

Page: 222 / 301

6 Programming

01.99

6FC5198-6AA60-0BP1

SINUMERIK 840C, OEM Version for Windows (BA)

6-37

6.2.7.2

Key functions

You move the input cursor through one character or one line by pressing one of
the ARROW keys.

Puts the input cursor at the beginning of a line.

Puts the input cursor at the end of the line.

PAGE UP/DOWN: Pressing these keys scrolls the screen one page up/down.

SHIFT + PAGE UP/DOWN: Puts the input cursor at the beginning/end of a
file.

The CANCEL key deletes the character underneath the input cursor. Identical
to the <DELETE> key on the MF2 keyboard.

The CLEAR key deletes the character to the immediate left of the input cursor.
Identical to the <BACKSPACE> key on the MF2 keyboard.

Moving the cursor

H o m e

En d

Deleting a character

D E L

B a ckspa ce

Summary of Contents for SINUMERIK 840C







































































































































































































































































































Search results

Summary of Contents for SINUMERIK 840C

Reviews:

Brands by name

Popular brands

Siemens SINUMERIK 840C, Operator'S Manual

Search results

Summary of Contents for SINUMERIK 840C

Reviews:

Brands by name

Popular brands