Siemens SINUMERIK 840C Operator'S Manual Download Page 196

Page: 196 / 301

6 Programming

01.99

6FC5198-6AA60-0BP1

SINUMERIK 840C, OEM Version for Windows (BA)

6-11

When you have finished editing, you can save the created file under any DOS
name (8 characters.3 characters).

•

To do this, select Save As... from the File menu.

The following dialog box appears:

Fig. 6-6

"Save As ..." dialog box

•

Enter the file name in the text box.

•

Press the OK softkey.

The file is stored in the selected directory.

Note

The file name is only displayed in the left-hand list box of the corresponding
directory if the naming complies with NCK conventions.

If an illegal name has been assigned to the file (e.g. %100 instead of mpf100),
the file is only displayed in the list box on the right.

Summary of Contents for SINUMERIK 840C







































































































































































































































































































Search results

Summary of Contents for SINUMERIK 840C

Reviews:

Brands by name

Popular brands

Siemens SINUMERIK 840C, Operator'S Manual

Search results

Summary of Contents for SINUMERIK 840C

Reviews:

Brands by name

Popular brands