manualshive.com logo in svg

Siemens SINUMERIK 840C, Operator'S Manual

Share
Download
Siemens SINUMERIK 840C Operator'S Manual Download Page 118

01.99

4 Machine

© Siemens AG 1999 All Rights Reserved

6FC5198-6AA60-0BP1

SINUMERIK 840C, OEM Version for Windows (BA)

4-51

•

By selecting a workpiece and pressing the INPUT key you can branch into
the directory of the workpiece. Then, all the NCK files (including the job
list) are displayed in the data selector. However, individual files cannot be
transferred to the NCK memory.

If errors occur on execution of the softkey functions SELECT PROG./JOB, the
following dialog messages and alarms are generated:

Table 4-3

Dialog messages during loading

Error

Dialog message

No directory has been called.

Illegal directory

A directory but no workpiece has been selected.

Please enter correct name

The softkey has been pressed but the workpiece name
contains illegal characters.

Name illegal

The softkey has been pressed while a workpiece list is
being processed

Workpiece already being loaded

Workpiece selection disabled by PLC.

Workpiece selection disabled

Table 4-4

Alarm messages during loading

Error

Alarm message

The workpiece does not exist on the MMC hard disk.

Workpiece not available

The job list on the MMC is faulty.

Job list faulty

An error occurs during job list processing.

Several alarms

A workpiece without job list and with several (or no)
main programs has been transferred to the NCK

Transfer workpiece, no program selected

The instructions in the job list are processed one after the other during
workpiece transfer. If one of the instructions is incorrect (e.g. syntax error),
processing of the job list is aborted and a message box is displayed.

Workpiece processing is triggered with the NC START key and the selected
program is started.

The machine functions can be selected by pressing the relevant softkeys.

The individual machine functions are described in the subsection "Additional
machine functions".

The normal procedure for selecting a workpiece is to load several main
programs and subroutines from the hard disk into the NCK memory and
selecting max. one part program per channel.

Dialog messages
and alarms

Basically, the
following applies:

Selecting part
programs

Summary of Contents for SINUMERIK 840C














































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands