manualshive.com logo in svg

Siemens SINUMERIK 840C, Operator'S Manual

Share
Download
Siemens SINUMERIK 840C Operator'S Manual Download Page 123

4 Machine

01.99

6FC5198-6AA60-0BP1

© Siemens AG 1999 All Rights Reserved

4-56

SINUMERIK 840C, OEM Version for Windows (BA)

4.3

Additional machine functions

4.3.1

Overstore

One or more values in the buffer can be modified by means of the
OVERSTORE machine function.

You can modify the following data:

•

Tool number T

•

Tool offset number D...

•

Spindle speed S...

•

Auxiliary function H...

•

Miscellaneous function M... (up to 3 values).

An invalid D number is not checked in the OVERSTORE mode.

The program will run with these values until a new value appears in the
program for the overstore function or until you enter values modified by
"Overstore".

Overstoring is only possible when the input window is active!

•

The machine area has been selected.

•

The mode group and channel in which you wish to overstore have been
selected.

•

One of the following four modes has been selected:
AUTOMATIC, TEACH IN, MDA, JOG.

•

For overstoring, a running program must be stopped.

Press the OVERSTORE softkey.

Activate the cursor in the "Overstore" input window.

Preconditions

Operating
sequence

 O ver-
store

Summary of Contents for SINUMERIK 840C














































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands