Siemens SINAMICS GM150, Operating And Installation Instructions

Page: 133 / 258

5. Press the <▲> or <▼> function key to select the first parameter. Then press the <Change>
function key to activate the setting. The display changes to the menu for selecting the
DriveObject (DO).
'HILQHRSHUDWLRQ
+HOS
&DQFHO 2.
U 3%62//3%3='HPSI9RU
U ,B,67 ,BLVW %HWUDJ JO
U $8667 $XVVWHXHUJUDG JO
U )B $86 $QWU IB $XVJ JOD
%,&2'2VHOHF
&8*0
%B,1)12
9(&72509
Ⴍ
6. Press the <▲> or <▼> function key to select the desired DO. Then press the <OK> key to
confirm the setting. The "Parameter selection" menu opens.
'HILQHRSHUDWLRQ
+HOS
%DFN 2.
&8B*06HOHFWLQJSDUDPHWHUV
$OOSDUDPHWHUV
U3%3='HPSI:RUG
Ⴍ
7. You have two parameter selection options:
– All parameters of the selected DO
Press the <▼> function key to select "All parameters". Then confirm the selection with
OK. A list of all parameters of the selected DO is displayed.
– Selection of plausible parameters (see "List of the signals for the operation screen"
below) of the selected DO.
Select a parameter from the list of the signals for the operation screen of the selected DO.
The selected parameters from this list are displayed in the operation screen with an
abbreviated name (e.g. NSOLL).
8. Select the desired parameter or enter the parameter from the numeric keypad.
9. Confirm the setting by pressing the <OK> function key. The "Please wait" message appears
briefly. Then the operation screen appears in the configuration you set.
9(&725$86
3%62//
,B,67 $HII
$867 )B$86 +]
3:,5. N:
/7,7
+HOS
&KDQJH 6HO3DU 'LDJ
Operation
8.2 Operation via the AOP30 operator panel
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017
133