Siemens SINAMICS GM150 Operating And Installation Instructions Download Page 139

Page: 139 / 258

The menu structure of the inhibit functions

6DIHW\ORFNV

2SHUDWH/RFN

3DUDPORFN

$FFHVVOHYHO

Calling up the inhibit function menu

1. Press the key with the key symbol.

Ⴍ

6DIHW\ORFNV

3DUDPORFN

$FFHVVOHYHO

2SHUDWHORFN

%DFN

ႱႧ

&KDQJH

QRWBDFWLYH

ႱႧ

QRWBDFWLYH

6WDQGDUG

+HOS

&KDQJH
&KDQJH

The various inhibit functions are described in the following.

Operator input inhibit

Parameters can only be changed by entering a password.
1. Press the <▲> or <▼> function key to select the "Operator input inhibit" function.
2. Press the <Change> function key to select the "active" or "inactive" setting.

– "active"

The contents of parameters can be viewed, but not saved. If you want to save a

parameter, this message appears: "Note: Inhibit function active".

The <OFF> key acts. The <LOCAL/REMOTE>, <LEFT>, <RIGHT>, <UP> and

<DOWN> keys are inhibited.

The key symbol indicates the inhibit.

– "inactive"

No operator input restrictions.

3. Press the <Back> function key to save the setting.

Parameterization inhibit

Prevent unauthorized parameterization. This function is protected with a password.

Operation

8.2 Operation via the AOP30 operator panel

SINAMICS GM150 6SL3815-2LN41-4AA2

Operating Instructions 04/2017

139

Summary of Contents for SINAMICS GM150



































































































































































































































































Search results

Summary of Contents for SINAMICS GM150

Reviews:

Siemens SINAMICS GM150, Operating And Installation Instructions, Page: 139 / 258

Search results

Summary of Contents for SINAMICS GM150

Reviews: