manualshive.com logo in svg

Siemens SIMOTICS M-1PH818, Operating And Installation Instructions

Share
Download
Siemens SIMOTICS M-1PH818 Operating And Installation Instructions Download Page 25

Cooling water-cooled motors

Cooling circuit
The cooling circuit consists of an enclosed, internal air circulation, which is driven by the shaft-

mounted fans and stainless steel tubes that are directly integrated into the laminated stator 

core; cooling type IC 71W according to IEC / EN 60034‑6.

Cooling capacity
To ensure adequate cooling of the motor, it is essential to adhere to the specified cooling water 

rate, temperature and cooling water quality (Page 29).

Cooling with external fan

The machine has cooling method IC 416 in accordance with IEC / EN 60034-6. The separately 

driven fan unit and the terminal box can be mounted in a different position depending on the 

order.

WARNING

Improper use of the external fan 
Improper use of the external fan can result in death, serious injury, and material damage. 
● Observe and follow the operating instructions of the external fan.

See also

Additional documents (Page 167)

External fan

Different external fans are used depending on the shaft height and particular motor version:

Type 

Version

External fan

1PH818. 
1PH822.

Standard version

EC external fan with single-phase EC motor

Version with option L75 External fan with three-phase motor 
Version with option L76 EC external fan with three-phase EC motor

1PH828.

Standard version

External fan with three-phase motor 

EC external fans with a fixed operating speed have been specifically designed for this motor 

series.

Degree of protection

Depending on the version, the machine has degree of protection IP23 or IP55.  

Description

SIMOTICS M-1PH8  1PH818., 1PH822., 1PH828.

Operating Instructions 10/2017

25

Summary of Contents for SIMOTICS M-1PH818



























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands