Description
3
3.1
Area of application
The three-phase motors of this series are used as crane drives.
These motors are specifically designed for the following crane applications:
● STS (ship to shore) crane.
● ARTG (automated rubber tired gantry) crane.
● ARMG (automated rail mounted gantry) crane
● Straddle carrier crane
● Mobile STS crane
These machines have been designed for operation with frequency converters. They are
characterized by their high power density, ruggedness, long lifetime, and overall reliability.
Intended use of the machines
These machines are intended for industrial installations. They comply with the harmonized
standards of the series EN / IEC 60034 (VDE 0530). It is prohibited to use these motors in
hazardous zones if the marking on the motor rating plate does not explicitly permit line or
converter operation. If other/more wide-ranging demands (e.g. protection so that they cannot
be touched by children) are made in special cases – i.e. use in non-industrial installations –
these conditions must be ensured by the customer.
Note
Machine directive
Low-voltage motors are components designed for installation in machines in accordance with
the current Machinery Directive. Commissioning is prohibited until it has been absolutely
identified that the end product is in conformance with this Directive. Please observe the
EN / IEC 60204-1 standard.
3.1.1
CE marking
Use of machines without CE marking
Machines without CE marking are intended for operation outside the European Economic Area
(EEA). Do not use any machines without a CE marking in the EEA!
1PC134, 1PC136 crane motors SH 132 ... 315
Operating Instructions, 02/2019, A5E43212221A
17
