Siemens SIMOTICCS A 1FU9, Operating Instructions Manual

Page: 17 / 126

• Electronic modules should not be brought into contact with electrically insulating materials,
such as:
– Plastic film
– Plastic parts
– Insulating table supports
– Clothing made of synthetic fibers
• Always place electrostatic sensitive devices on conductive bases.
• Always pack, store and transport electronic modules or components in conductive
packaging, such as:
– Metallized plastic or metal containers
– Conductive foam material
– Domestic aluminum foil
The ESD protective measures required for components that can be destroyed due to electrostatic
discharge are shown in the following drawings:
6HDWLQJSRVLWLRQ
6WDQGLQJSRVLWLRQ
6WDQGLQJVHDWLQJSRVLWLRQ
E E
D
F
D
I I I I I
D
F F
H
G G
H
G
a = conductive floor sur‐
face b = ESD table c = ESD shoes
d = ESD overall e = ESD wristband f = cabinet ground connection
Electromagnetic compatibility
This machine is designed in accordance with IEC/EN 60034, and when used as specified, it
complies with the requirements of European Directive 2014/30/EU regarding Electromagnetic
Compatibility.
2.8 Interference immunity
By selecting suitable signal cables and evaluation units, ensure that the interference immunity
of the machine is not diminished.
Safety information
2.8 Interference immunity
1FU9
Operating Instructions, 07/2020, A5E46712792A
15