Siemens Simodrive 1PH7 Planning Manual Download Page 13

Page: 13 / 176

1PH7/1-13



Induction Motors, 1PH7 (APH7S) – 05.04 Edition

Motor Description

1.1 Applications and features

Applications

The 1PH7 series is suitable for the closed-loop speed controlled operation of
main spindles on machine tools, transfer lines, production machines and special-
purpose machines.

Frame sizes 100 to 160

Frame size 225
(this will be available up
to 04.2004)

Frame sizes 180 to 225
(frame size 225 will be
available from 04.2004)

Fig. 1-1

1PH7 induction motors

Features

1PH7 motors are compact, force-ventilated four-pole squirrel-cage induction mo-
tors.

Depending on the shaft height, 1PH7 motors have rated powers from
3.7 up to 100 kW at rated speeds from 500 to 2500 RPM.

Wide constant-power range

Short length

Full rated torque is continually available – even at standstill

High overload capability

Minimized disturbing envelope dimensions as a result of the integrated terminal
box (for shaft heights 100–160)

Standards, regulations

The appropriate standards, regulations are directly assigned to the functional
requirements.

Summary of Contents for Simodrive 1PH7














































































































































































Search results

Summary of Contents for Simodrive 1PH7

Reviews:

Siemens Simodrive 1PH7, Planning Manual, Page: 13 / 176

Search results

Summary of Contents for Simodrive 1PH7

Reviews: