manualshive.com logo in svg

Siemens Simodrive 1PH7, Planning Manual, Page: 117 / 176

Share
Download
Siemens Simodrive 1PH7 Planning Manual Download Page 117

1PH7/3-117

 Siemens AG, 2004. All rights reserved

Induction Motors, 1PH7 (APH7S) – 05.04 Edition

Motor Components

3.1  Thermal motor protection

Table 3-1

Features and technical data

Type

KTY 84

Resistance when cold (20 

°

C)

approx. 580 Ohm

Resistance when hot (100 

°

C):

approx. 1000 Ohm

Connecting

Using the encoder cable

Response temperature

Warning < 120 

°

C

Alarm/shutdown at max. 155 

°

C 

 5 

°

C

The resistance change is proportional to the winding temperature change. For
1PH7 motors, the temperature characteristic is taken into account in the closed-
loop control.

The warning signal from the evaluation circuit in the SIMODRIVE drive converter
can be externally evaluated.

High short-time overload conditions require additional protective measures. This is
due to the thermal coupling time of the sensor. If the overload condition (4

 

 

M

0

)

lasts longer than 4 s, additional protection should be provided.

The temperature sensor cables are included in the encoder cable.

!

Warning

If the user carries-out an additional high-voltage test, then the ends of the
temperature sensor cables must be short-circuited before the test is carried-out! If
the test voltage is connected to only one terminal of the temperature sensor, it will
be destroyed.

3

Summary of Contents for Simodrive 1PH7

















































































































































































Reviews:

No comments