Siemens SIMATIC TD 200 User Manual Download Page 63

Page: 63 / 132

3-19

SIMATIC TD 200 Operator Interface
C79000-G7076-C272-01

Selecting the Baud Rate

The Setup Menu allows you to choose the baud rate for the TD 200. You can
choose either 9600 baud (9.6 Kbaud), 19.2 Kbaud, or 187.5 Kbaud. Use the
following procedure to enter the baud rate for the TD 200:

Key

Action

Display

ESC

The TD 200 enters the Menu mode.

VIEW MESSAGES

MENU MODE:

The TD 200 scrolls down the menu
options five times.

TD 200 ADDRESS

SETUP MENU:

The TD 200 scrolls down the Setup
Menu to the baud rate option.

BAUD RATE

9.6K

SETUP MENU:

ENTER

Press

ENTER

to move the cursor to the

baud rate field. Use the up or down
arrow keys to toggle between the baud
rates.

SETUP MENU:

BAUD RATE

19.2K

ENTER

Press

ENTER

to store the new baud

rate.

SETUP MENU:

BAUD RATE

19.2K

Note

Pressing ESC at any time while you are setting the baud rate aborts the edit and
restores the previous baud rate.

Operating the TD 200

Summary of Contents for SIMATIC TD 200





































































































































Search results

Summary of Contents for SIMATIC TD 200

Reviews:

Related manuals for SIMATIC TD 200

Brands by name

Popular brands

Siemens SIMATIC TD 200, User Manual

Search results

Summary of Contents for SIMATIC TD 200

Reviews:

Related manuals for SIMATIC TD 200

Brands by name

Popular brands