Siemens SIMATIC TD 200, User Manual

Page: 38 / 132

2-16
SIMATIC TD 200 Operator Interface
C79000-G7076-C272-01
For this example, enter the message text as shown in Figure 2-14. Place the
cursor on the 39th digit position and click on “Embedded Data...” button below.
TD 200 Configuration Wizard
Cancel Finish
You have asked to configure 3 message(s). Define your message by
placing your highest priority message first.
< Prev
Embedded Data...
INS
<Previous Message Next Message >
VB120
V14.5
Message beginning address:
Message enabled bit:
10 15 20
A C K N O W L E D G E M E S S A G E
30 35 40
B Y P R E S S I N G E N T E R . . .
25
Place cursor on the
39th position and click
“Embedded Data...”
TD200
Message 3 of 3
5
Figure 2-14 Wizard: Embedding Data to Require Acknowledgement
The Embedded Data dialog box is shown in Figure 2-15. For this message, select
a data format of “None” since there is no data to be displayed. To force
acknowledgement of the message, select the “User must acknowledge message”
check box.
Note
If you have more than one embedded data value in a message, you only need to
select the acknowledgement check box for the first embedded data value in the
message. The TD 200 ignores the acknowledge bit in all subsequent data values
of the message.
For this example, make the selections shown in Figure 2-15 and click on the “OK”
button to return to the message configuration dialog box.
Configuring the TD 200