Technical Specifications
5
This section details the specifications and operating conditions of the device.
5.1
Power Supply Specifications
The RUGGEDCOM RSG2100P can be equipped with the following power supplies:
NOTICE
Electrical hazard – risk of power supply failure or damage to the device
Make sure power input to the device is within the specified input range. If power
input is too high, damage to the power supply may occur. If power input is too low,
damage to the device may occur.
Note
For specifications on the PoE power supply, refer to
"PoE Power Supply Specifications
.
Input Range
Power
Supply Type
Minimum
Maximum
Internal Fuse
Rating
Maximum Power
Consumption
24 VDC
10 VDC
36 VDC
6.3 A(F)
48 VDC
36 VDC
72 VDC
3.15 A(T)
88 VDC
300 VDC
2 A(T)
85 VAC
264 VAC
2 A(T)
28 W
(F) denotes fast-acting fuse
(T) denotes time-delay fuse.
Power consumption varies based on configuration. 10/100Base-TX ports consume roughly 1 W less than
fiber optic ports.
The HI power supply is the same power supply for both AC and DC.
5.2
PoE Power Supply Specifications
Input Range
Power
Supply Type
Minimum
Maximum
Internal
Fuse Rating
Maximum Power
Consumption
48 VDC
37 VDC
72 VDC
2 A(T)
68 W
(T) denotes time-delay fuse.
RUGGEDCOM RSG2100P
Installation Manual, 04/2022, C79000-G8976-1041-20
33
