Siemens SIMATIC RUGGEDCOM RSG2100P Installation Manual Download

Page: 50 / 58

Certification

The RUGGEDCOM RSG2100P device has been thoroughly tested to guarantee its

conformance with recognized standards and has received approval from recognized

regulatory agencies.

6.1

Approvals

This section details the standards to which the RUGGEDCOM RSG2100P complies.

6.1.1

CSA

This device meets the requirements of the following Canadian Standards Association

(CSA) standards under certificate 16.70068356:
•

CAN/CSA-C22.2 No. 62368-1

Information Technology Equipment – Safety – Part 1: General Requirements (Bi-

National Standard, with UL 62368-1)

•

UL 62368-1

Information Technology Equipment – Safety Part 1: General Requirements

The Certificate Body (CB) test certificate is available on SIOS at

https://

support.industry.siemens.com/cs/ww/en/view/109794212

6.1.2

European Union (EU)

This device is declared by Siemens Canada Ltd. to comply with essential

requirements and other relevant provisions of the following EU directives:
•

EN 62368-1

Information Technology Equipment – Safety – Part 1: General Requirements

•

EN 61000-6-2

Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity

for Industrial Environments

•

EN 60825-1

Safety of Laser Products – Equipment Classification and Requirements

RUGGEDCOM RSG2100P

Installation Manual, 04/2022, C79000-G8976-1041-20

Summary of Contents for SIMATIC RUGGEDCOM RSG2100P



























































Search results

Summary of Contents for SIMATIC RUGGEDCOM RSG2100P

Reviews:

Related manuals for SIMATIC RUGGEDCOM RSG2100P

Brands by name

Popular brands

Siemens SIMATIC RUGGEDCOM RSG2100P, Installation Manual

Search results

Summary of Contents for SIMATIC RUGGEDCOM RSG2100P

Reviews:

Related manuals for SIMATIC RUGGEDCOM RSG2100P

Brands by name

Popular brands