Siemens Simatic PC Panel PC 870, Equipment Manual

Page: 66 / 154

Configuring the Computing Unit in BIOS Setup Release 11/02
5-10
SIMATIC Panel PC 870 Computing Unit, Equipment Manual
Numlock Switches Numlock on or off following power on In the case of the
“Auto” setting, the status set when the system was last switched off is
retained.
Key Click A keystroke can be heard
Keyboard auto-
repeat rate
Increase in automatic key repeat rate
“Hardware Options” field
The following submenu appears after selecting the “Hardware Options” field in
the main menu:
PhoenixBIOS Setup Utility
Item Specific Help
ESC Exit
Select Item
Select Menu
+ / –
Enter Select
Change Values F9
F10
Setup Defaults
Save and Exit Sub-Menu
PCI - MPI / DP:
Main
Hardware Options
[Enabled]
Enable or disable the
PCI - Multi Point
Interface (MPI / DP)
PS/2 Mouse:
[Enabled]
CRT / LCD selection:
[SIMULTAN]
LCD-Screensize:
[Graph& Text Expand]
F1 Help
Ethernet Address: 080006247000
On Board Ethernet
[Enabled]
Legacy USB Support:
[Disabled]
LAN Remote Boot: [Enabled]
SafeCard functions:
[Enabled]
Fan Control:
[Enabled]
Figure 5-7 ”Hardware Options” submenu
The parameters of the interfaces present on the basic module are set here.
Entry Meaning
PCI-MPI/DP Enables the CP5611-compatible MPI/DP interface. The recourses
are managed by the BIOS PCI plug and play mechanism.
On Board Ethernet
[
Enabled
]
The Ethernet port on the motherboard is
enabled.
[
Disabled
]
The Ethernet port on the motherboard is
disabled.
Ethernet Address The individual Ethernet address is displayed here.
LAN Remote Boot
[
Enabled
]
It is possible to boot over a connected
LAN. The respective boot source is displayed as
Intel

Boot-Agent in the boot sequence menu.
[
Disabled
]
Booting using LAN is not possible.