Operation and configuration
9.2 Additional Drivers and Applications
SIMATIC Panel PC 877
9-8
Operating instructions, Release 07/2006, A5E00877780-01
9.2.3
Enable/disable touch functionality
The procedure for deactivating and reactivating the touch functionality using the "UPDD"
software is described in the table below.
No. Procedure
1
Open the Control Panel menu in the Windows operating system
2
Open the properties of the "Pointer Device" application in the Control Panel to access the "Pointer Device Properties"
dialog.
3
In the "Devices" tab in the "Pointer
Device Properties" dialog, there is a
list of devices (also known as DCUs).
As shown in the figure, mark the
device 02 or the active touch
controller of the system and open the
"Advanced" tab.
4
In the "Advanced" tab, deactivate the
"Enabled" option and load the settings
by clicking the "Apply" button. The
touch screen is now deactivated.
Summary of Contents for SIMATIC PANEL PC 877
Page 2: ......
