Siemens SIMATIC PANEL PC 877 Operating Instructions Manual Download

Page: 257 / 288

Detailed descriptions

17.6 BIOS setup

SIMATIC Panel PC 877
Operating instructions, Release 07/2006, A5E00877780-01

17-65

17.6.10 Exit menu

The setup program is always closed from this menu.

Figure 17-21 Exit menu

Save Changes & Exit

All changes are saved; a system restart is carried out with the new

parameters.

Discard Changes & Exit All changes are discarded and the system performs a restart based on

the old parameters.

Get Default Values

All parameters are set to safe values.

Load Previous Values

The last saved values are reloaded.

Save Changes

Save all Setup settings.

Summary of Contents for SIMATIC PANEL PC 877

































































































































































































































































































Search results

Summary of Contents for SIMATIC PANEL PC 877

Reviews:

Related manuals for SIMATIC PANEL PC 877

Brands by name

Popular brands

Siemens SIMATIC PANEL PC 877, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC PANEL PC 877

Reviews:

Related manuals for SIMATIC PANEL PC 877

Brands by name

Popular brands