Siemens SIMATIC PANEL PC 877 Operating Instructions Manual Download

Page: 252 / 288

Detailed descriptions

17.6 BIOS setup

SIMATIC Panel PC 877

17-60

Operating instructions, Release 07/2006, A5E00877780-01

Disabled

The password is disabled.

Enabled

Certain Setup fields are thus configurable by the

user, including the user password.

User password is

The field resets automatically from [Disabled] to [Enabled] when the

password is entered.

Set supervisor password

This field opens the dialog box for entering a password. Once it has

been entered, the supervisor password can be changed or deleted by

pressing ”Return” and thus deactivated.

Set user password

This field opens the dialog box for entering a password. Once it has

been entered correctly, the user password can be changed or deleted

by pressing ”Return” and thus deactivated.
[Disabled]

No password required for system boot.

Password on boot

[Enabled]

Supervisor or user password must be entered for

system boot.

[Normal]

All types of hard-disk access are permitted.

Fixed disk boot sector

[Write protect]

the user cannot install an operating system. This

is a way of protecting against boot viruses.

This mode of protection is not enabled unless "Password on boot " is

[enabled].
[Supervisor]

Diskette access is not possible unless the

supervisor password was entered during system

boot.

Floppy disk drive access

[User]

Diskette access is not possible unless the user

password was entered during system boot.

Attention: This function cannot be used under

Windows NT/2000 Professional/XP Professional,

since this operating system does not access the

diskette via BIOS routines. Please use the

Windows NT/2000/ Professional/XP Professional

system programs for this purpose.

Outputs a virus check prompt when booting.
[Disabled]

No message during system startup.

[Daily]

Daily

[Weekly]

Every Monday

Virus check reminder

[Monthly]

Every first of the month

Outputs a message when booting requesting a system backup.
[Disabled]

No message during system startup.

[Daily]

Daily

[Weekly]

Every Monday

System backup reminder

[Monthly]

Every first of the month

Summary of Contents for SIMATIC PANEL PC 877

































































































































































































































































































Search results

Summary of Contents for SIMATIC PANEL PC 877

Reviews:

Related manuals for SIMATIC PANEL PC 877

Brands by name

Popular brands

Siemens SIMATIC PANEL PC 877, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC PANEL PC 877

Reviews:

Related manuals for SIMATIC PANEL PC 877

Brands by name

Popular brands