Siemens SIMATIC PANEL PC 877 Operating Instructions Manual Download

Page: 244 / 288

Detailed descriptions

17.6 BIOS setup

SIMATIC Panel PC 877

17-52

Operating instructions, Release 07/2006, A5E00877780-01

Settings in the Advanced menu

Plug&Play means that all modules are automatically detected and installed,

providing they support the Plug&Play functionality.
[Other]

BIOS handles the entire Plug&Play capability, default setting.

[Win95]

BIOS handles the entire Plug and Play capability

[Win98]

The operating system handles some of the Plug&Play functions.

[WinMe]

The operating system handles the Plug&Play functions.

Installed O/S

[Win/2000/XP] The operating system handles the Plug&Play functions.
[Yes]

All installations under Plug and Play are deleted and the

configuration is retriggered the next time the system boots. The

entry is then reset to [No]. System components that do not support

Plug&Play have to be entered manually.

Reset

configuration

data

[No]

The Plug&Play system components are initialized after the next

system start.

[Primary]

[Secondary]

One IDE interface for max. two drives.

[Primary &

Secondary]

Two IDE interfaces for max. four drives.

Local bus IDE

adapter

[Disabled]

No local IDE interface.

[DOS]

The drive tables are adapted for DOS access operations in

accordance with Enhanced IDE.

Large disk

access mode

[OTHER]

The tables are not adapted.

USB boot:

This function defines whether the operating system can be booted from a USB

device.

Summary of Contents for SIMATIC PANEL PC 877

































































































































































































































































































Search results

Summary of Contents for SIMATIC PANEL PC 877

Reviews:

Related manuals for SIMATIC PANEL PC 877

Brands by name

Popular brands

Siemens SIMATIC PANEL PC 877, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC PANEL PC 877

Reviews:

Related manuals for SIMATIC PANEL PC 877

Brands by name

Popular brands