Introduction to the SINAUT ST7 system
2.12 Standards and approvals of SINAUT ST7 products
SINAUT ST7 Station control system - System Manual
108
System Manual, 05/2007, C79000-G8976-C178-06
UL/CSA approval
The SINAUT ST7 products included in the "List of SINAUT ST7 products" are certified as
follows:
UL Recognition Mark
Underwriters Laboratories (UL) based on:
Standard UL 508
CSA Certification Mark
Canadian Standards Association (CSA) based on:
Standards CSA No. 14 and 142
File no. E208174
2.12.1.3 Additional approvals for the MD3 analog dial-up modem
List of SINAUT ST7 products including MD3 modem
Name
Order no.
Hardware version
TIM 33
6NH7 800-3AA30
6 or higher
TIM 43
6NH7 800-4AA30
6 or higher
TIM 43D
6NH7 800-4AD30
6 or higher
MD3
6NH7 810-0AA30
4 or higher
For the stand-alone MD3 modem and for all TIM modules with integrated MD3 modems
listed in the table, the following certifications apply for Europe, USA and Canada.
Approval for Europe
Approval regulations
The MD3 is intended for connection to the analog public telecommunication network. In
Germany, the device is connected with the standard TAE6 connecting cable with N coding
supplied with the device. The telephone line is passed through and allows down-line
connection of an approved telephone.
It should be pointed out that if a handset is off the hook when the modem terminates the
connection, there may still be an established connection that is subject to charge.
The device meets the requirements of the "Allgemeinen Anschalterlaubnis" (AAE) "general
connection permit". Anyone may connect and operate the device over the standard plug
("Telekommunikations-Anschalte-Einrichtungen" (TAE)).
EU approval
In accordance with the Council ruling 98/482/EEC, this device is approved for connection as
an individual terminal device in the public telephone network. Due to the differences existing
between the public telephone networks in various countries, this approval is not necessarily
a guarantee for successful operation of the device at all network connection points.
