manualshive.com logo in svg

Siemens SIMATIC NET SINAUT ST7, System Manual

The Siemens SIMATIC NET SINAUT ST7 is a cutting-edge industrial automation system offering seamless connectivity. Enhance your operations with our comprehensive System Manual, available for free download at manualshive.com. This manual provides detailed instructions for optimal utilization, ensuring smooth functioning of this innovative product.

Share
Download
background image

Glossary 

 

  

 

SINAUT ST7 Station control system - System Manual 

324

 

System Manual, 05/2007, C79000-G8976-C178-06 

data as well as the status of all SINAUT subscribers in the network and makes this data 

available directly to WinCC for fast transfer to the process image. 

ST7sc 

The SINAUT system allows the networking of SIMATIC stations with a control center over a 

WAN (Wide Area Network). This control center can also be a SIMATIC station or a PC-

based control center, for example, WinCC with the SINAUT ST7cc add-on. 
SINAUT ST7sc allows the manufacturers of control systems to connect to SINAUT without 

needing to integrate a SINAUT interface. Communication is over OPC: As an OPC server, 

SINAUT ST7sc forms the interface between the SINAUT system and a control system 

connected as an OPC client. 
The OPC interface is also suitable for data exchange with other applications, for example, 

the Microsoft Office application Excel. 

Station 

In the SINAUT world, the term station includes the entire hardware components required for 

acquisition, processing and communication with other stations or a master station/control 

center. A station can, for example, consist of a modem, a TIM and a programmable 

controller (in turn consisting of a CPU and I/O modules). A SINAUT station can also include 

several programmable controllers, or, in the case of a node station, several TIMs. 

Status message 

A status message is a process status (for example pump on, valve open) or alarm (for 

example limit value exceeded). This is binary information with the possible values 0 or 1. 

Eight status messages are put together to form one byte. 

TCP/IP 

(Transmission Control Protocol / Internet Protocol) 
Network protocols for connecting two computers in the Internet. IP is the basic protocol. UDP 

is based on IP and sends individual packets. These can arrive at the recipient in a different 

order from the order in which they were sent - they can even be lost. TCP is used to make 

the connection reliable and makes sure, for example, that data packets are passed on to the 

application in the correct order. In addition to the IP addresses, UDP and TCP also involve 

port numbers between 1 and 65535 with which the various services can be distinguished. 
On a Windows PC, the WINSOCK.DLL (or WSOCK32.DLL) is responsible for handling the 

two protocols. 

TIM 

(Telecontrol Interface Module) 
The TIM transmission processor is a communications module that handles all data 

transmission functions provided by the SINAUT system independently. Depending on the 

type, the TIM has one or two WAN interfaces, an MPI interface or an Ethernet interface. 

Depending on the requirements, a variety of transmission equipment can be connected. The 

module is supplied in an S7-300 housing. 

Summary of Contents for SIMATIC NET SINAUT ST7









































































































































































































































































































































Reviews:

No comments

Related manuals for SIMATIC NET SINAUT ST7

Warner Electric MCS202-E1 User Manual preview
MCS202-E1
Brand: Warner Electric Pages: 3
iCeeO2 C30 Instruction Manual preview
C30
Brand: iCeeO2 Pages: 7
SABAF 10 Instructions For Use, Maintenance Instructions preview
10
Brand: SABAF Pages: 6
FAAC 740 D Manual preview
740 D
Brand: FAAC Pages: 14
Eaton SC100 Operation Handbook preview
SC100
Brand: Eaton Pages: 86
EA SV Series Original Operating Manual preview
SV Series
Brand: EA Pages: 24
Acclaim Lighting Canvas User Manual preview
Canvas
Brand: Acclaim Lighting Pages: 32
Vasco RF User And Installation Manual preview
RF
Brand: Vasco Pages: 32
Abra AK-10 User Manual preview
AK-10
Brand: Abra Pages: 16
SAI Connect Operation Manual preview
Connect
Brand: SAI Pages: 16
Hable One Starting Manual preview
One
Brand: Hable Pages: 3
Harpo BraillePen 12 Quick Start Manual preview
BraillePen 12
Brand: Harpo Pages: 35
Hardi HC 6500 Quick Manual preview
HC 6500
Brand: Hardi Pages: 2
Laars SC6 Installation And Operation Instructions Manual preview
SC6
Brand: Laars Pages: 28
Laser 5078 Instructions preview
5078
Brand: Laser Pages: 2
LAS 16261 Quick Manual preview
16261
Brand: LAS Pages: 6
Lars Thrane LT-4100 User & Installation Manual preview
LT-4100
Brand: Lars Thrane Pages: 141
UniPOS VIT 01 Instruction Manual preview
VIT 01
Brand: UniPOS Pages: 51

Brands by name

Popular brands

Load more brands