Siemens SIMATIC NET SCALANCE X-000 Series, Operating Instructions Manual

Page: 7 / 52

For additional information on industrial security measures that may be implemented, please
visit
https://www.siemens.com/industrialsecurity ( https://www.siemens.com/industrialsecurity )
Siemens’ products and solutions undergo continuous development to make them more secure.
Siemens strongly recommends that product updates are applied as soon as they are available
and that the latest product versions are used. Use of product versions that are no longer
supported, and failure to apply the latest updates may increase customers’ exposure to cyber
threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under
https://www.siemens.com/industrialsecurity ( https://www.siemens.com/industrialsecurity )
Catalogs
You will find the article numbers for the Siemens products of relevance here in the following
catalogs:
● SIMATIC NET Industrial Communication / Industrial Identification, catalog IK PI
● SIMATIC Products for Totally Integrated Automation and Micro Automation, catalog ST 70
● Industry Mall - catalog and ordering system for automation and drive technology, Online
catalog ( https://mall.industry.siemens.com/goos/WelcomePage.aspx?regionUrl=/
de&language=en )
You can request the catalogs and additional information from your Siemens representative.
Device defective
If a fault develops, please send the device to your SIEMENS service center for repair. Repairs
on-site are not possible.
Recycling and disposal
The products are low in pollutants, can be recycled and meet the requirements of the WEEE
directive 2012/19/EU for the disposal of electrical and electronic equipment.
Do not dispose of the products at public disposal sites.
For environmentally friendly recycling and the disposal of your old device contact a certified
disposal company for electronic scrap or your Siemens contact (Product return ( https://
support.industry.siemens.com/cs/ww/en/view/109479891 )).
Note the different national regulations.
Trademarks
The following and possibly other names not identified by the registered trademark sign
®
are
registered trademarks of Siemens AG:
SIMATIC NET, SCALANCE, C-PLUG, OLM
Introduction
1.1 On the Operating Instructions
SCALANCE X-000
Operating Instructions, 12/2018, C79000-G8976-C344-03
7