Siemens SIMATIC ITP1000 Operating Instructions Manual Download Page 83

Page: 83 / 114

Technical specifications

6.5 System resources

SIMATIC ITP1000
Operating Instructions, 05/2017, A5E37340160-AB

6.5

System resources

Currently allocated system resources

All system resources (hardware addresses, memory configuration, allocation of interrupts,

DMA channels) are assigned dynamically by the Windows OS, depending on the hardware

configuration, drivers and connected external devices.
You can in each case view information on the current configuration of system resources or

any existing conflicts with the installed operating system as follows:

●

Windows icon in the status bar: Start > Enter "msinfo32" in the search box.

6.6

BIOS description

6.6.1

Overview

Parameterize your device in the BIOS Setup.

BIOS Setup program

The BIOS Setup program, or BIOS Setup for short, is located, together with the setup

parameters, in a FLASH block on the motherboard.
Change the setup parameters of the device in the BIOS Setup, e.g. system time or boot

sequence.

Changing the device configuration

Your device configuration is preset for operating with the included software. You should only

change the default setup parameters if technical modifications to your device require

different parameters.

Note
Documentation
BIOS Setup is described for all devices and device configurations. Some BIOS submenus or

Setup parameters may not be included, depending on your order. The interface of your

BIOS Setup can deviate from the figures in this document.
You can find a detailed description of the BIOS on the Support website under

Entry ID: 92189178 (

http://support.automation.siemens.com/WW/view/en/92189178

Summary of Contents for SIMATIC ITP1000



















































































































Search results

Summary of Contents for SIMATIC ITP1000

Reviews:

Related manuals for SIMATIC ITP1000

Brands by name

Popular brands

Siemens SIMATIC ITP1000, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC ITP1000

Reviews:

Related manuals for SIMATIC ITP1000

Brands by name

Popular brands