Technical specifications
6.2 Directives and declarations
SIMATIC ITP1000
70
Operating Instructions, 05/2017, A5E37340160-AB
6.2
Directives and declarations
6.2.1
Guidelines and declarations
Notes on the CE mark
The following applies for this SIMATIC product:
RTTE directive
This product is designed for the following applications:
Application
Requirement for
Industrial applications
EN 61000-6-4
EN 61000-6-2
The devices are compliant with EN 61000-3-2 (Transient currents) and
EN 61000-3-3 (Voltage fluctuation and Flicker).
This product meets the requirements of EC directive 1999/5/EC ”Radio Equipment and
Telecommunications Terminal Equipment - Use of the Radio Spectrum”:
EN 300 328 / EN 301 893 / EN 301 489-17 / EN 301 489-1 / EN300330-2
The directive contains the requirements of the Directive of the Council on the Approximation
of the Laws of Member States relating to Electromagnetic Compatibility (EMC Directive).
●
Safety: see Low voltage directive
Low voltage directive
This product fulfills the Directive 2014/35/EU of the European Parliament and of the Council
on the harmonization of the laws of Member States relating to electrical equipment designed
for use within certain voltage limits.
Compliance with this directive has been tested to EN 60950-1.
Declaration of conformity
The EC declaration of conformity and the corresponding documentation are made available
to authorities in accordance with the EC directives stated above. Your sales representative
can provide these on request.
Installation guidelines
The installation guidelines and safety notices specified in the supplied documentation must
be adhered to during commissioning and operation.
Connecting peripherals
Noise immunity requirements to EN 61000-6-2 are met if connected peripherals are suitable
for industrial applications. Peripheral devices must only be connected using shielded cables.
