Siemens SIMATIC ITP1000 Operating Instructions Manual Download Page 50

Page: 50 / 114

Devise functions and operating the device

4.4 Trusted Platform Module (TPM)

SIMATIC ITP1000

Operating Instructions, 05/2017, A5E37340160-AB

4.4

Trusted Platform Module (TPM)

The device features a so-called Trusted Platform Module (TPM) according to standard 2.0.

You can enable this module in the Security dialog of BIOS-Setup. Follow the instructions of

BIOS Setup.
The Trusted Platform Module can be used, for example, in combination with BitLocker drive

encryption under Windows 7 and Windows 10. Follow the instructions of the operating

system.

Note
Improper usage poses the risk of data loss. Always keep the keys and passwords in a

secure place. Encrypted data cannot be retrieved. The Siemens warranty does not cover a

hardware reset after loss of the password.

Summary of Contents for SIMATIC ITP1000



















































































































Search results

Summary of Contents for SIMATIC ITP1000

Reviews:

Related manuals for SIMATIC ITP1000

Brands by name

Popular brands

Siemens SIMATIC ITP1000, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC ITP1000

Reviews:

Related manuals for SIMATIC ITP1000

Brands by name

Popular brands