Siemens SIMATIC IPC647E Operating Instructions Manual Download Page 15

Page: 15 / 200

Product description

1.3 Scope of application

SIMATIC IPC647E
Operating Instructions, 11/2018, A5E45589180-AA

High investment protection

●

Platform with embedded Intel components for long-term stability

●

Availability: 3 to 6 years

●

Assured spare parts availability: 5 years after product phase-out

●

Certified for worldwide marketing (cULus)

●

Support of legacy interfaces (COM)

●

Compatible installation across device generations

●

Worldwide service and support

User-friendly application scenarios for commissioning, use and service

●

High flexibility and expandability thanks to integrated interfaces and up to 4 slots (PCI and

PCI Express)

●

Pre-installed and activated operating system

●

Fast restoration of delivery state of the operating system (with supplied data storage

medium)

●

Universal use as industrial workstation or industrial server

●

Gbit LAN with teaming capability (3 x LAN 10/100/1000 Mbps connections)

●

Service-friendly device configuration (modifications, service), e.g. replacement of filter or

front fan without tools

●

Flexible usage options with telescopic rails

1.3

Scope of application

The SIMATIC IPC offers system integrators, cabinet designers, system engineers and

machine designers a 19" rack PC platform for high-performance applications and IT

applications on the control and cell level for:

●

Process and visualization applications

●

Industrial image processing

●

Quality assurance and monitoring tasks

●

Measurement, control and rule-based tasks

●

Data acquisition and management

The SIMATIC IPC has CE certification for use in the industrial sector as well as in residential

and commercial areas and small businesses. In addition to the industrial applications,

therefore, it can also be used in building automation or in public facilities.

Summary of Contents for SIMATIC IPC647E









































































































































































































Search results

Summary of Contents for SIMATIC IPC647E

Reviews:

Related manuals for SIMATIC IPC647E

Brands by name

Popular brands

Siemens SIMATIC IPC647E, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC647E

Reviews:

Related manuals for SIMATIC IPC647E

Brands by name

Popular brands