Mounting and connecting the device
3.2 Mounting the device
SIMATIC IPC477E
42
Operating Instructions, 11/2020, A5E37455003-AF
1.
Working from the front, insert the device into the mounting cut-out.
2.
Make sure that all four spring fasteners latch fully into place on the upper and lower side of
the device. If necessary, press the device again carefully into the mounting slot at the place
that is not fully latched into position.
3.
Insert a mounting clip into the cutout provided on the device.
Make sure it is in the correct position, see the section "AUTOHOTSPOT".
4.
To secure the mounting clip, tighten the grub screw with the slot screwdriver, torque 0.5
Nm.
