4 Installation and Commissioning
House Control and Weather Sensors - LOGO! Set 11
Entry ID: 68585346, V2.1, 09/2018
20
S
iem
e
n
s A
G
2
0
1
8
A
ll r
igh
ts
re
se
rv
e
d
4.3.3
Assigning devices and programs
Table 4-6
No.
Device
Program for the device in the zip file
1.
KTP400 weather station (Set 11)
68585346_LOGO!_Set11_weather_station_V21.ap15
2.
KTP700 (Set 10)
68585346_LOGO!_Set11_HMI_WinCC_V21.ap15
3.
LOGO! weather station (Set 11)
68585346_LOGO!_Set11_LOGO!8_weather_station.lsc
contained in the network project
68585346_LOGO!_Set11_LOGO!_8.lnp
4.
Master LOGO! (Set 9)
68585346_LOGO!_Set11_LOGO!_8.lsc
contained in the network project
68585346_LOGO!_Set11_LOGO!_v20.lnp
5.
Slave LOGO! (Set 9)
6.
LOGO! TDE (Set 9)
4.3.4
Loading the programs into the KTP400 and KTP700
Table 4-7
No.
Action/response
WinCC
1.
Start WinCC and with "
Browse”, open
the project "
68585346_LOGO!_
Set11 _weather_station_V20
”.
Then click "
Open”.
Note:
Repeat the steps of this table for the
project "
68585346_LOGO!_Set11_
HMI_WinCC_V20" of the KTP700,
unless you would like to operate
Set 11 separately.
2.
Click on "
Open the project view” to
open it.
