Operating Instructions (compact)
1.9 Commissioning
SIMATIC HMI IPC577C
28
Operating Instructions (Compact), 05/2009, A5E02368077-01
1.9.4
Setting the panel type
1.9.4.1
First commissioning
First commissioning
● The "SIMATIC PC Wizard" program is automatically started once during commissioning.
● The "SIMATIC PC Wizard" implements the specific settings for the Panel PC during the
initial startup of the operating system.
● Several dialogs appear on screen during the commissioning of the SIMATIC PC.
NOTICE
Start the PC for commissioning in an unchanged factory state and follow the dialogs
until their conclusion.
Procedure
Device-specific drivers are set during the hardware detection and configuration phase.
The type of SIMATIC PC is selected and detected automatically.