Documentation guide
Analog input module F-AI 4xI 0(4)..20mA 2-/4-wire HF (6ES7136-6AA00-0CA1)
Manual, 08/2018, A5E41448857-AB
11
SIMATIC Automation Tool
You can use the SIMATIC Automation Tool to run commissioning and maintenance activities
simultaneously on various SIMATIC S7 stations as a bulk operation independently of the TIA
Portal.
The SIMATIC Automation Tool provides a multitude of functions:
●
Scanning of a PROFINET/Ethernet network and identification of all connected CPUs
●
Address assignment (IP, subnet, gateway) and station name (PROFINET device) to a
CPU
●
Transfer of the data and the programming device/PC time converted to UTC time to the
module
●
Program download to CPU
●
Operating mode switchover RUN/STOP
●
Localization of the CPU by means of LED flashing
●
Reading out CPU error information
●
Reading the CPU diagnostic buffer
●
Reset to factory settings
●
Updating the firmware of the CPU and connected modules
You can find the SIMATIC Automation Tool on the Internet
https://support.industry.siemens.com/cs/ww/en/view/98161300
PRONETA
With SIEMENS PRONETA (PROFINET network analysis), you analyze the plant network
during commissioning. PRONETA features two core functions:
●
The topology overview independently scans PROFINET and all connected components.
●
The IO check is a fast test of the wiring and the module configuration of a system.
You can find SIEMENS PRONETA on the Internet
