Procedure
1. Plug in the BusAdapter and screw it tight.
2. Remove the protective caps of the LC plug connector, if present.
3. Grasp the assembled LC plug connector on the enclosure and insert it into the PROFINET
socket on the BusAdapter BA 2XLC until it clicks. The LC plug connectors are coded to ensure
correct connection.
CAUTION
Risk of damage to eyes
Do not look directly into the opening of the optical transmitter diodes. The emitted light
beam could damage your eyes.
4. Secure the PROFINET IO cable to protect the plug from pulling.
Result
PROFINET IO is connected to the device via the BusAdapter BA 2xLC.
See also
SIMATIC NET; Industrial Ethernet / PROFINET; Passive Network Components (
support.industry.siemens.com/cs/ww/en/view/84922825
)
4.6
BusAdapter BA 2xRJ45
4.6.1
Basics of BusAdapter BA 2xRJ45
Definition
You connect the IO device to the PROFINET IO system via the BusAdapter BA 2×RJ45 with
Industrial Ethernet cables.
Note
Configuration guidelines for modules with PROFINET IO interfaces
You may only operate the modules with PROFINET IO interfaces in LANs (Local Area Networks)
if all connected nodes are equipped with SELV/PELV power supplies (or have equivalent
protection).
A data transfer point is prescribed for connection to the WAN (Wide Area Network) that
guarantees this degree of safety.
Installation
4.6 BusAdapter BA 2xRJ45
BusAdapter for Distributed I/O
24
Equipment Manual, 10/2021, A5E39261458-AC
