Siemens SICLOCK TC 400, Operating Instructions Manual

Page: 48 / 134

Configuration Tool
7-46
©
Siemens AG 2007 All Rights Reserved
SICLOCK
®
TC 400
Requirements
PC
•
Screen resolution of at least 1280x1024 pixels
•
Java Runtime, at least V1.4.0 or higher
•
Web browser, e.g. Microsoft Internet Explorer
•
Connection via one of the four Ethernet ports of the device
SICLOCK TC 400
•
Assignment of an IP address on the device
A valid IP address must be assigned for the Ethernet port of the device that is
to be used for the configuration.
Default addresses as delivered each with subnet mask 255.255.255.0:
−
Port 1: 192.168.1.10
−
Port 2: 192.168.2.20
−
Port 3: 192.168.3.30
−
Port 4: 192.168.4.40
PC must be in the same subnet.
Parameters, entries and lists
A parameter is considered as a group of associated values. Each value is desig-
nated as an entry of its parameter.
Parameters of the same kind can form a list. Such lists are displayed as [ ].
Parameters are identified by their unique parameter number. The parameter
number is always in three parts, e.g. 0.05.12.
Notice
Entries can be edited individually, but not read or written individually. The param-
eter is always read or written with all its entries. If a list is being considered, the
entire list is read or written.