Siemens SICLOCK TC 400 Operating Instructions Manual Download

Page: 106 / 134

Messages

12-104

SICLOCK

TC 400

Density of synchronization

Information

Specifies the number of input synchronizations per interval.
The message is output cyclically and is used to judge the reception quality.

Synchronization status

Information

The message is output cyclically (e.g. every 12 hours) in order to document the current
external synchronization in the archive.

Status of synchronization (changeover)

Information

The synchronization status has changed.

System start

System

The system has been started. The message is triggered when the system starts.

TFTP file requested

Information

A TFTP file has been requested.

(E.g. firmware update, Web data update, etc.)

TFTP file received

Information

A file has been loaded via TFTP.

(E.g. firmware update, Web data update, etc.)

TFTP file transferred

Information

A file has been transferred from the device via TFTP.

(E.g. firmware update, Web data update, etc.)

Time initialized by hardware

Application

An initial synchronization of the clock module has been performed.

Time set by HMI

Application

Time domain(s) has(have) been changed via HMI

Table 12-1

Message overview with event type and brief description

Summary of Contents for SICLOCK TC 400
























































































































Search results

Summary of Contents for SICLOCK TC 400

Reviews:

Related manuals for SICLOCK TC 400

Brands by name

Popular brands

Siemens SICLOCK TC 400, Operating Instructions Manual

Search results

Summary of Contents for SICLOCK TC 400

Reviews:

Related manuals for SICLOCK TC 400

Brands by name

Popular brands