7/126
Siemens Building Technologies
SED2 variable speed drives
CM1U5192en
HVAC Products
Introduction
01.2002
1
Introduction
1.1 Purpose of this document
These operating instructions contain all the information necessary to correctly mount,
install, commission, and parameterize (programming) SED2 variable speed drives
(VSD) as well as for effective and troublefree operation.
1.2 Validity
The operating instructions apply to all SED2 variable speed drives, frame sizes A to F.
They are supplied with the product, and are part of the full range of SED2 VSD
literature.
1.3 Target audience
This document is primarily intended for installers, electrical installers, service
technicians, and operators or end users of HVAC plants (Heating, Ventilating, and Air
Conditioning).
1.4 Document structure
The document is divided into the following sections:
Chapter 1
Introduction
Chapter 2
Safety instructions
Chapter 3
Mechanical installation
Chapter 4
Electrical installation and wiring of the motor and VSD
Chapter 5
Commissioning
Description of basic and advanced operator panels
Quick commissioning
Chapter 6
Programming (parameterization)
Description of functions
System parameter list
Chapter 7
Troubleshooting, warning and error code lists
Chapter 8
Technical data
Chapter 9
Appendix:
Applicable standards and declarations of conformity
List of abbreviations, index
1.5 Referenced documents
Getting Started Guide:
The Getting started guide is a brief multilingual guide to provide users fast access to
all the basic information necessary to install, set up, and operate the VSD.
Target audience: Installers, installing engineers, and commissioning engineers.
Engineering manual: Documentation on basics.
This manual contains in-depth information on all technical matters relating to the SED2
VSD.
Target audience: Project design engineers, planners, users of the product, technical
staff, and service.
CM1G5192X
CM1J5192en
