120/126
Siemens Building Technologies
SED2 variable speed drives
CM1U5192en
HVAC Products
Appendix
01.2002
9.1.1
Retrofitting EMC filters for VSD frame sizes A to C
The SED2 VSDs of frame sizes A to C without filter can be retrofitted with footprint
filters as needed. Mounting instructions are included in the filter packing.
Below are the order numbers for the voltage ranges and frame sizes:
Frame size
200 V to 240 V, 3 AC
380 V to 480 V, 3 AC
500 V to 575 V, 3 AC
A
SED2-BFLTR-A
SED2-BFLTR-A
No filter available.
B
SED2-BFLTR-B
SED2-BFLTR-B
No filter available.
C
SED2-BFLTR-C-L
SED2-BFLTR-C-H
No filter available.
9.2 Applicable standards
European low-voltage guideline
The SED2 product range corresponds to the requirements of the low-voltage
guideline 73/23/EEC, supplemented by guideline
98/68/EEC
. The devices have
been certified to the following standards:
EN 60146-1-1 Semiconductor inverters – General requirements and line
commutated inverters.
EN 60204-1
Safety of machinery – Electrical equipment of machines.
European guideline for machinery
This guideline does not apply to the SED2 VSD product series. The products
were tested comprehensively and evaluated for adherence to important
guidelines pertaining to health and safety in a typical application. A declaration
of conformity will be provided on request.
European EMC guideline
If installed according to the recommendations issued in this manual, the SED2
satisfies all EMC guideline requirements as defined in the EMC Product
Standard for Power Drive Systems EN61800-3.
Underwriters Laboratories
Frequency inverter devices 5B33 approved by UL and CUL for use in pollution
class 2 environments.
ISO 9001
Siemens SBT applies a quality management system according to the
requirements of ISO 9001.
