815_58300000003806_ara_en_e.doc – 30.01.12
Seite 6 von 67
3.3.5
Half load (optional)
The “Half Load” function reduces water consumption and the running
time. Basically this is achieved by passing over the prerinse and the
second intermediate rinse cycle.
3.3.6
Vario speed (optional)
The Vario speed function reduces the programme running time with
a higher water and energy consumption. This is achieved by using
more water in the rinse cycle and with water points with two-basket
function.
3.4
Pushbuttons / Programme selection
3.4.1 Intensive
70°
The programme consists of a prerinse at 50°, wash cycle at 70°, two
intermediate rinse cycles, final rinse at 70° and a drying cycle. Please
ensure that the utensils are washed in the bottom basket only until the
temperature is reached.
3.4.2
Auto 55°–65° (depending on model)
In the auto programme the Aqua sensor decides not only on a water
change after the prerinse, but it also specifies the temperature of the
wash cycle and the number of intermediate rinse cycles. If clean water
is detected in the prerinse, the water from the prerinse is also used in
the wash cycle, a wash cycle at 65°, one intermediate rinse cycle and
a drying cycle. If dirty water is detected in the prerinse, the prerinse
cycle runs, a wash cycle at 51°, two intermediate rinse cycles and
a drying cycle.
3.4.3 ECO
50°
The programme consists of a wash cycle at 50°, one intermediate
rinse cycle, final rinse at 66° and a drying cycle. The Aqua sensor
is
not
active in this programme. Please ensure that the utensils are
washed in the bottom basket only until the temperature is reached.
3.4.4 Gentle
40°
The programme consists of a prerinse cycle, a wash cycle at 40°, one
intermediate rinse cycle, final rinse at 55° and a drying cycle.
3.4.5 Quick
35°
The programme consists of a wash cycle at 35°, one intermediate
rinse, final rinse at 55° without drying. The Aqua sensor is
not
active
in this programme.
3.4.6 Prerinse
The programme consists of a prerinse only. The Aqua sensor is
not
active in this programme.
