manualshive.com logo in svg

Siemens SCALANCE XR-300M, Compact Operating Instructions

Share
Download
Siemens SCALANCE XR-300M Compact Operating Instructions Download Page 75

FM

The product meets the requirements of the standards:
● Factory Mutual Approval Standard Class Number 3611
● FM Hazardous (Classified) Location Electrical Equipment:

Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 and

Non Incendive / Class I / Zone 2 / Group IIC / T4

Note
Only variants with 24 VDC power supply meet the requirements of this approval.

cULus Approval for Information Technology Equipment

cULus Listed I. T. E.
Underwriters Laboratories Inc. complying with
● UL 60950-1 (Information Technology Equipment)
● CSA C22.2 No. 60950-1-03
Report no. E115352

Note
Only variants with 24 VDC power supply meet the requirements of this approval.

cULus approval for industrial control equipment

cULus Listed IND. CONT. EQ.
Underwriters Laboratories Inc. complying with
● UL 508
● CSA C22.2 No. 142-M1987
Report no. E85972

Note
Only variants with 100 to 240 VAC power supply meet the requirements of this approval.

cULus Approval Hazardous Location

cULus Listed I. T. E. FOR HAZ. LOC.

Approvals

SCALANCE XR-300M

Compact Operating Instructions, 11/2019, A5E02661171-15

75

Summary of Contents for SCALANCE XR-300M



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands