manualshive.com logo in svg

Siemens SCALANCE XR-300M, Compact Operating Instructions

Share
Download
Siemens SCALANCE XR-300M Compact Operating Instructions Download Page 36

5.4

Installation of modular devices

5.4.1

Installation and removal of media modules

Connecting media modules and SFP transceivers

WARNING

Install and remove media modules only when the power is off
Media modules may only be inserted in or removed from a SCALANCE device when the 

power supply to the device has been turned off.
Use only approved media modules
Use only "MM900" media modules in the module slots of SCALANCE devices.

CAUTION

Remember the orientation of media modules
On modular devices, there are always two module slots arranged opposite each other. 

Remember the correct orientation when installing MM900 media modules.

Example:
● The first MM900 media module is installed in slot 3.
● The second MM900 media module installed in slot 4 must be turned through 180 degrees.
On modular devices for rack mounting, pairs of module slots are located one above the other 

in which modules can be inserted in a specific order:
Example of a rack device:
● The first MM900 media module is installed in slot 1.
● The second MM900 media module installed in slot 7 must be turned through 180 degrees.
Other modules are then inserted in slots 2 and 8 or 3 and 9 etc.
The permitted operating temperature is decided by the fully equipped device ( media 

SFP transceiver).
With modular devices, it is not only the switch that decides the permitted operating 

temperature of the overall device but also the temperature ranges of the MM900 media 

modules and the SFP transceivers. You will find details in the technical specifications of the 

relevant components.
The following aspects can restrict the maximum permitted operating temperature:
● The orientation of the carrier device.
● The use of SFP transceivers.
● The use of transceivers of the types LH, LH+ or ELH.

Mounting
5.4 Installation of modular devices

SCALANCE XR-300M

36

Compact Operating Instructions, 11/2019, A5E02661171-15

Summary of Contents for SCALANCE XR-300M



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands