manualshive.com logo in svg

Siemens SCALANCE XR-300M, Compact Operating Instructions

Share
Download
Siemens SCALANCE XR-300M Compact Operating Instructions Download Page 23

The "F" LED for the fault status

The "F" LED (fault) provides information on the error/fault status of the device. While the device 

is starting up, this LED has the following meaning:

LED color

LED status

Meaning during the device startup

-

off

Device startup completed successfully.

red

on

Device startup not yet completed or a fault/error has occurred.

red

flashes

Bad firmware image.

During normal operation, the "F" LED provides the following information:

LED color

LED status

Meaning during operation

-

off

No operating problems.

red

on

The device has detected an error. The signaling contact opens.

The "DM" LED for the display mode

The "DM" LED (Display Mode) indicates which of the four display modes A, B, C or D is 

currently active. The meaning of the L1, L2 and P1, P2, ... LEDs depends on the display mode.

LED color

LED status

Meaning

-

off

Display mode A

green

on

Display mode B

orange

on

Display mode C

yellow/orange

flashes

Display mode D

Selecting the display mode

Press the SELECT/SET button to set the required display mode. If the SELECT/SET button is 

not pressed for longer than a minute, the device automatically changes to display mode A.

Pressing the SELECT/SET button 

starting at display mode A

Status of the "DM" LED

Display mode

-

off

Display mode A (default mode)

Press once

lit green

Display mode B

Press twice

lit orange

Display mode C

Press 3 times

flashes yellow/orange

Display mode D

The "L1" and "L2" or "L" LEDs for the power supply

Whereas on other devices, the "L1" and "L2" LEDs indicate information about the power, on the 

SCALANCE X306-1LD FE, this is done by the "L" LED. A redundant power supply for this 

device can be recognized by the color of the LED.

Device description

4.3 LED display

SCALANCE XR-300M

Compact Operating Instructions, 11/2019, A5E02661171-15

23

Summary of Contents for SCALANCE XR-300M



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands