Siemens SCALANCE XR-300M Compact Operating Instructions Download Page 71

Page: 71 / 82

ATEX (explosion protection directive)

WARNING

Risk of explosion in hazardous areas
When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that the

associated conditions in the following document are adhered to:
"SIMATIC NET Product Information Use of subassemblies/modules in a Zone 2 Hazardous

Area".
You will find this document here:
● On the data medium that ships with some products:

– Product CD / product DVD
– SIMATIC NET Manual Collection

● On the Internet pages of Siemens Industry Online Support (

https://

support.industry.siemens.com/cs/ww/en/view/78381013

)

The SIMATIC NET products described in these operating instructions meet the requirements

of the EU directive 2014/34/EU "Equipment and Protective Devices for Use in Potentially

Explosive Atmospheres".

Note
Type of protection of the device
The devices are approved for various types of protection. You can find the type of protection of

your device and the ATEX certificate number on the nameplate.

Approvals

SCALANCE XR-300M

Compact Operating Instructions, 11/2019, A5E02661171-15

Summary of Contents for SCALANCE XR-300M



















































































Search results

Summary of Contents for SCALANCE XR-300M

Reviews:

Brands by name

Popular brands

Siemens SCALANCE XR-300M, Compact Operating Instructions

Search results

Summary of Contents for SCALANCE XR-300M

Reviews:

Brands by name

Popular brands