Siemens RUGGEDCOM WIN7251, Installation Manual

Page: 43 / 48

RUGGEDCOM WIN7251
Installation Guide
Chapter 5
Certification
Approvals 35
Certification
The RUGGEDCOM WIN7251 base station has been thoroughly tested to guarantee its conformance with
recognized standards and has received approval from recognized regulatory agencies.
CONTENTS
• Section 5.1, “Approvals”
• Section 5.2, “EMC and Environmental Type Tests”
Section 5.1
Approvals
The following details the approvals issued for the RUGGEDCOM WIN7251.
CONTENTS
• Section 5.1.1, “MET Laboratories”
• Section 5.1.2, “CSA”
• Section 5.1.3, “TÜV Rheinland”
• Section 5.1.4, “Other Approvals”
• Section 5.1.5, “RoHS”
Section 5.1.1
MET Laboratories
This base station meets the requirements of the following standards:
•
ANSI/ISA 12.12.01, CSA C22.2 No. 213
Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous
(Classified) Locations
• EN 60079-0:2009
Explosive Atmospheres – Equipment – General Requirements
• EN 60079-15:2010
Explosive Atmospheres – Equipment Protection By Type of Protection "N"
The base station is marked with an MET classified mark that indicates compliance with both Canadian and U.S.
requirements.