Chapter 1
Introduction
RUGGEDCOM WIN7251
Installation Guide
2
Feature Highlights
RUGGEDCOM NMS is especially suited for remotely monitoring and configuring RUGGEDCOM routers, switches,
serial servers and WiMAX wireless network equipment. For more information, contact a Siemens Sales
representative.
CONTENTS
•
Section 1.1, “Feature Highlights”
•
•
Section 1.3, “Required Tools and Materials”
•
Section 1.4, “Decommissioning and Disposal”
Section 1.1
Feature Highlights
The RUGGEDCOM WIN7251 provides the full base station functionality necessary for serving a single sector:
General
• All-outdoor, single-box base station solution
• Mobile WiMAX compliance based on IEEE 802.16e standard and WiMAX Forum Wave2 (MIMO) certification
• GPS synchronization
• Backbone Ethernet connectivity via a 10/100Base-T network interface
• Fixed and mobile subscriber unit support
• 3.5 MHz, 5 MHz, 7 MHz and 10 MHz channel bandwidth support
• MIMO (2×2) support
• Non-Line-of-Sight (NLOS)
• Small footprint and light weight enables simple installation and deployment by a single person
Antennas
• 2 × N-Type Antennas
• Supports integrated, external sector or omni-directional antennas, lightning protected
• Built-in GPS
Network Interfaces
• 10/100Base-T Half/Full Duplex IEEE 802.3 CSMA/CD
• ASN-GW Compatibility WiMAX Forum R6, Profile C
Power Supply
• RUGGEDCOM RP100/RP110: 48 VDC, 10 to 60 VDC, 88 to 300 VDC
• RUGGEDCOM WIN1010: 85 to 264 VAC
Hazardous Location Certification
• Class I, Division 2
• ATEX Zone 2
