RUGGEDCOM WIN7251
Installation Guide
Chapter 5
Certification
Other Approvals
37
A copy of the TÜV Rheinland Declaration of Conformity is available from Siemens Canada Ltd. For contact
information, refer to
.
Section 5.1.4
Other Approvals
This device meets the requirements of the following additional standards:
•
IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric
Power Substations
•
IEC 61850-3
General Requirements
•
IEC 870-2-2
Telecontrol Equipment and Systems – Part 2: Operating Conditions – Section 2: Environmental Conditions
(Climatic, Mechanical and Other Non-Electrical Influences)
•
MIL-STD-810F
Department of Defense Test Method Standard for Environmental Engineering Considerations and Laboratory
Tests – Method 509.4 (Salt Fog)
Section 5.1.5
RoHS
This device is declared by Siemens Canada Ltd to meet the requirements of the following RoHS (Restriction of
Hazardous Substances) directives for the restricted use of certain hazardous substances in electrical and electronic
equipment:
•
China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic Information Products
A copy of the Material Declaration is available online at
https://support.industry.siemens.com/cs/ww/en/
Section 5.2
EMC and Environmental Type Tests
The RUGGEDCOM WIN7251 has passed the following Electromagnetic Compatibility (EMC) and environmental
tests.
