RUGGEDCOM WIN
User Guide
Chapter 5
Setup and Configuration
Configuring the Access List
89
1
2
Figure 85: Access List Screen
1.
Add
2.
Delete
2. Configure the following parameter(s) as required:
Parameter
Description
Access List
Synopsis:
{ Enable, Disable }
Displays the setting for the Access List.
Total Number of Entries
Displays the number of entries.
Max Number of Self-Learned Entries
Default:
1
Displays the maximum number of Self-Learned Entries
3. Configure the following parameter(s) as required:
Parameter
Description
MAC Address
Displays the MAC Address.
Status
Synopsis:
{ Sticky, Non-Sticky }
Displays the Status. Sticky addresses remain in the table after a
reboot. Non-Sticky addresses are cleared from the table after a
reboot.
Type
Synopsis:
{ Self-Learned, Preprovisioned }
Displays Self-Learned Entries.
4. Click
Apply
.
